BLFSD - ABLEFILM 570
- MSDS: BLFSD
- Manufacturer: ABLESTIK LABS
- Product Name: ABLEFILM 570
- National Stock Number: 8040-00N018511
Product Identification
Product ID:ABLEFILM 570
MSDS Date:01/05/1988
FSC:8040
NIIN:00N018511
MSDS Number: BLFSD
Responsible Party
RANCHO DOMINGUEZ, CA 90221
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 213-764-4600
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
NON-HAZARDOUS INGREDIENTS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: NOT LIKELY TO PRODUCE
ANY ADVERSE EFFECT DUE TO ITS LOW VOLATILITY. EYES: SHOULD NOT
CAUSE IRRITATION DUE TO ITS LOW VAPOR PRESSURE. SKIN ABSORP: INFO
NOT AVAIL. INGEST: UNKNOWN, HOWEVER , SLIGHT POTENTIAL FOR ORAL
TOXICITY ISEXPECTED. ACUTE/ CHRONIC: SKIN: CAN CAUSE SKIN IRRIT &
DERM TO SENSITIVE PERS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEEK MEDICAL
ATTENTION. SKIN: WASH IMMEDIATELY WITH SOAP AND WATER. IF
IRRITATION PERSISTS, SEEK MEDICAL ATTENTION IMMEDIATELY. INHAL:
REMOVE TO FRESH AI R IMMEDIATELY. INGEST: SEEK MEDICAL ATTENTION
IMMEDIATELY.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>480F,>249C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SWEEP UP AND COLLECT IN AN APPROPRIATE
CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE FROZEN AT ALL TIMES.
Other Precautions:AVOID CONTACT WITH SKIN, EYES AND CLOTHING. GOOD
HOUSEKEEPING IS REQUIRED. AVOID INHALATION OF VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
IF NEEDED.
Ventilation:USE ADEQUATE VENTILATION. LOCAL EXHAUST IS RECOMMENDED WHEN
APPROPRIATE TO CONTROL EMPLOYEE'S EXPOSURE.
Protective Gloves:RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:VENT CURING OVEN TO OUTDOORS.
Supplemental Safety and Health
CNDTNS (POLYM): CAN RESULT. PRODUCT SHOULD BE USED WITH CAUTION UPON
CURING. VENT CURING OVEN TO OUTDOORS.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>400F,>204C
Vapor Pres:N/A @ 25C
Spec Gravity:1.2
Evaporation Rate & Reference:NON-VOLAT SOLID (BU AC=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR FILM; ODORLESS
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT PRIOR TO CURE.
Hazardous Decomposition Products:CO, ALDEHYDES, AND ACIDS UPON
INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:EXCESSIVE HEAT. IF THIS PRODUCT IS
NOT USED FOR THIN BOND LINE APPLICATION, VIOLENT CHEMICAL REACTION
(SEE SUPP DATA)
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES WITH ALL LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.